Product ID:H1072-1 WELDING ROD, HAYNES ALLOY 25
MSDS Date:05/01/1989
FSC:3439
NIIN:00-554-2699
MSDS Number: BJNLZ

HAYNES INTERNATIONAL INC SUB OF CABOT CORP

1020 W PARK AVE
KOKOMO, IN 46902-9013
US

Emergency Phone: 317-456-6894

Info Phone: 317-456-6625

Cage: 80357

HAYNES INTERNATIONAL INC SUB OF CABOT CORP

9013 KOKOMO, IN 46904-9013 US

Telephone: 318-263-2002;765-456-6614

Cage: 80357

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 8 - 9.5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 40.8% %

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 16% %

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 12% %

OSHA PEL 5 MG/M3/ 10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 2.4% %

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.32% %

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.2% %

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

STRONTIUM

CAS: 7440-24-6

Fraction By Weight: 20% %

LD50 LC50 Mixture:NOT PROVIDED BY MANUFACTURER
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:BRONICHIAL ASTHMA, LUNG FIBROSIS,
PNEUMONIA, SIDEROSIS, CANCER, ALLERGIC REACTIONS IN SOME PEOPLE,
METAL FUME FEVER, PULMONARY IRRITANT, DERMATITIS, RESPIRATORY
HYPERSENSITIVITY, CENTRAL NERVOUS SYSTE M EFFECTS.
Explanation of Carcinogenicity:NTP LISTS CHROMIUM AND CERTAIN CR
COMPOUNDS AS KNOWN CARCINOGENS AND LISTS NICKEL AND SOME NI
COMPOUNDS AS ANTICIPATED
Effects of Overexposure:METALLIC TASTE, NAUSEA, TIGHTNESS OF CHEST,
FEVER, DIZZINESS, DRYNESS OR IRRITATION OF EYES, NOSE OR THROAT,
COUGH, LOWER BACK PAIN, VOMITING, FATIGUE, HEADACHE, MUSCULAR
WEAKNESS, TREMORS, SYMPTOMS S IMILAR TO PARKINSON'S DISEASE.
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:IN THE EVENT OF OVEREXPOSURE, REMOVE VICTIM FROM THE SELDING
AREA, ADMINISTER FIRST AID AND OBTAIN PROMPT MEDICAL ATTENTION. IF
THE VICTIM IS UNCONSCIOUS, ADMINISTER OXYGEN. IF THE VICTIM IS NOT
BREAT HING, BEGIN RESUSCITATION IMMEDIATELY. EMPLOY FIRST AID
TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.

Autoignition Temp:Autoignition Temp Text:UNKNON
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:AS SHIPPED PRODUCT IS NONFLAMMABLE AND
NON-EXPLOSIVE. HOWEVER, WELDING ARCS AND SPARKS CAN IGNITE
COMBUSTIBLES, AND CAN INITIATE FIRES AND EXPLOSIONS.
Unusual Fire/Explosion Hazard:READ AND UNDERSTAND ANSI STANDARD Z49.1
"SAFETY IN WELDING AND CUTTING" AND NFPA STANDARD 51B "CUTTING AND
WELDING PROCESSES" BEFORE USING PRODUCT.

Spill Release Procedures:NONE PROVIDED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE PROVIDED BY MANUFACTURER.
Other Precautions:REMEMBER-THE SHIELDING GASES USED WITH THE PRODUCT
PROCESS CAN DISPLACE BREATHING AIR AND CAUSE ASPHYXIATION IN
CONFINED WORK SPACES OR UNVENTILATED AREAS.

Respiratory Protection:BE SURE TO USE A FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACES OR WHERE LOCAL EXHAUST
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE PEL AND TLV LIMITS.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC, OR BOTH,
TO KEEP FUMES AND GASES FROM WORKER'S BREATHING ZONE.
Protective Gloves:DRY WELDERS GLOVES
Eye Protection:PROTECTIVE FACE SHIELD
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTORS, AS WELL AS DARK, SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WELDERS SHOULD BE TRAINED TO AVOID ELECTRIC SHOCK BY MAINTAINING A DRY
WORK AREA, INSULATING THEMSELVES FROM THE WORKPLACE AND GROUND, AND
NOT TOUCHING LIVE ELECTRICAL PARTS.

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:7 - 9
Solubility in Water:INSOLUBLE
Appearance and Odor:METAL CORE RODS COATED WITH FLUX
Percent Volatiles by Volume:N/KU

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AS SHIPPED THESE PRODUCTS ARE STABLE AND
NONREACTIVE; AND THEY ARE NOT CHEMICALLY HAZARDOUS.
Hazardous Decomposition Products:COMPLEX OXIDE AND FLUORIDE
COMBINATIONS OF ALL INGREDIENTS LISTED IN INGREDIENT SECTION AS
WELL AS CO AND CO2.

Waste Disposal Methods:DISPOSE OF FUME, FLUX AND WELD GRINDING RESIDUES
FROM THE WORK AREA OR FROM FILTERS IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.